b'MEMORIZING RADIO CHANNELS AND OPERATING MODEThe information relating to the radio channels and the operating mode of the blind is saved on a memory card housed in the battery module base plate (namely, the fixed part applied on the glass or the window frame, which is connected to the blind).N.B.: if several blinds and several battery modules are installed, it is not necessary to always reposition each battery module onto its corresponding base plate, since the remote controls and channels are associated with the base plate and not with the battery module. Once positioned on the base plate, the battery module will read the information from the latter. Likewise, when a battery module is replaced, its reprogramming is not required, as the necessary information will be automatically provided by the base plate.To write information onto the base plate, please follow the instructions below.PROGRAMMING THE SCREENLINE REMOTECONTROL (OPTION)The battery module is equipped as standard with a radio receiver for remote control. A 99-channel radio transmitting board is used for the remote control. The radio receiver housed in the battery module can memorize up to 26 channels; it can thus receive an equal number of addresses from one or several remote controls.10'