b'4.Within 20 seconds hook the battery module onto the base plateto be memorized;5.Wait 10 seconds, until the yellow LED on the up arrow turns on and starts flashing quickly;6.Within 10 seconds send the cancellation command of thedesired channel by pressing the up and down push buttons simultaneously on the remote control, until the LEDs on the battery module flash green quickly: the chosen channel hasbeen deleted. Deleting all channels1.Detach the battery module from its base plate;2.Press the programming button on the battery module for 3seconds, until the yellow LED on the up arrow turns on and immediately off; Programming button 83.Within 20 seconds hook the battery module onto the base plateto be memorized;4.The yellow LED on the up arrow will turn on and then startflashing quickly. Wait 10 seconds until it flashes more slowly;12'